KWIKSTAGE GALVANISED STEEL SCAFFOLD

Kwikstage scaffold is a Modular System which is the most commonly scaffold used in Australia. Due to the systems flexibility, strength, being easy to install and dismantle. Australian Scaffolds has a range of Kwikstage Scaffold for sale and we freight to all parts of Australia with fast transit times.

  Image 1                                                                                SOLEBOARDS

Soleboards are either hardwood timber planks or LVL timber planks used under the standards to provide greater load bearing capacity. Make sure the base (ground) is firm and free of debris in the area of setup. When erecting scaffold on soil use sole boards (scaffold planks not less than 220mm wide). If the ground is not level use screw jacks. If jacks are not needed, always use base plates where the scaffold is erected on sole boards or where a concrete surface can be damaged. A scaffold must not be erected on soft ground or unconsolidated soil.

HEIGHT WIDTH LENGTH WEIGHT
38mm 230mm 500mm 4.00kg
CODE:SCA40.3300.050.003
PRICE:$8.00 +GST

  Image 2                                                                                SCREW JACKS

Screw Jacks locate in the bottom of the standards, they provide adjustment to cope with variations in ground levels, they have a safe working load of 4 tons each. Fits inside 48 x 4mm tube. 600mm in total length and 450mm adjustment. Enables safe use on uneven ground. The Base plates (150 x 150mm) provide extra stability. Heavy duty steel construction. Galvanised for long lasting protection. 34mm (thread)..

HEIGHT WIDTH LENGTH WEIGHT
600mm 150mm 150mm 5kg
CODE:SCA30.5602.148.003
PRICE:$25.00 +GST

  Image 3                                                                                FIXED COUPLER 48MM

Drop forged steel galvanised coupler, one piece design, easily replaceable bolts, connect horizontal or ledger tubes to standards. To be used in every position where the tube it secures under load.

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 48mm 1.5kg
CODE:SCA30.4700.048.003
PRICE:$6.50 +GST

  Image 4                                                                                SWIVEL COUPLER 48MM

Drop forged galvanised coupler, made of two parts which turn independently, single unit design, easily replaceable bolts, principally used for bracing and allowing tubes to be connected at any angle.

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 48mm 1.5kg
CODE:SCA30.4702.048.003
PRICE:$8.75+GST

  Image 5                                                                                STANDARD 0.5M

Max spindle travel is 55cm. To adjust to the ground, choose between different height-adjustable base plates with sturdy and self-cleaning round threads, with colour and notch markings to provide protection against over winding. The round threads of the spindle has an outside diameter of 38mm and a pitch of 8.1mm. The wing external dimension of the spindle nut is 205mm. The dimensions of the foot plate are 150 x 150mm. Base plate 80 = 6.3mm wall thickness. Load capacity = 76.0kN @ 100mm. Refer to Propping Technical Brochure for further assistance. Also known as a screw jack. Made in Germany.

HEIGHT WIDTH LENGTH WEIGHT
0.5mm 48mm 48mm 2.3kg
CODE:SCA21.2604.050.003
PRICE:$18.72 +GST

  Image 6                                                                                STANDARD 1.0M

Verticals form the support or the uprights and are made from Standard Scaffold Tubes of 48.3 x 4 mm thick. They have a series of “V” pressed welded at nominal 500 mm on the tube to provide a location for ledger and transoms. Products are manufactured to Australian Standard AS1576. Painted.
Steel Pallet Quantities: 0.3m – 200, 0.5m – 200, 1.0m – 100, 1.5m – 100, 2.0m – 100, 2.5m – 70, 3.0m – 70

HEIGHT WIDTH LENGTH WEIGHT
1.0mm 48mm 48mm 4.5kg
CODE: SCA21.2604.100.003
PRICE:$28.70 +GST

  Image 7                                                                                STANDARD 1.5M

Verticals form the support or the uprights and are made from Standard Scaffold Tubes of 48.3 x 4 mm thick. They have a series of “V” pressed welded at nominal 500 mm on the tube to provide a location for ledger and transoms. Products are manufactured to Australian Standard AS1576. Painted.
Steel Pallet Quantities: 0.3m – 200, 0.5m – 200, 1.0m – 100, 1.5m – 100, 2.0m – 100, 2.5m – 70, 3.0m – 70

HEIGHT WIDTH LENGTH WEIGHT
1.5mm 48mm 48mm 7.56kg
CODE:SCA21.2604.150.003
PRICE:$35.70 +GST

  Image 8                                                                                STANDARD 2.0M

Verticals form the support or the uprights and are made from Standard Scaffold Tubes of 48.3 x 4 mm thick. They have a series of “V” pressed welded at nominal 500 mm on the tube to provide a location for ledger and transoms. Products are manufactured to Australian Standard AS1576. Painted.
Steel Pallet Quantities: 0.3m – 200, 0.5m – 200, 1.0m – 100, 1.5m – 100, 2.0m – 100, 2.5m – 70, 3.0m – 70

HEIGHT WIDTH LENGTH WEIGHT
2.0mm 48mm 48mm 11.4kg
CODE:SCA21.2604.200.003
PRICE:$48.00 +GST

  Image 9                                                                                STANDARD 2.5M

Verticals form the support or the uprights and are made from Standard Scaffold Tubes of 48.3 x 4 mm thick. They have a series of “V” pressed welded at nominal 500 mm on the tube to provide a location for ledger and transoms. Products are manufactured to Australian Standard AS1576. Painted.
Steel Pallet Quantities: 0.3m – 200, 0.5m – 200, 1.0m – 100, 1.5m – 100, 2.0m – 100, 2.5m – 70, 3.0m – 70

HEIGHT WIDTH LENGTH WEIGHT
2.5mm 48mm 48mm 12.95kg
CODE:SCA21.2604.250.003
PRICE:$51.60 +GST

  Image 10                                                                             STANDARD 3.0M

Verticals form the support or the uprights and are made from Standard Scaffold Tubes of 48.3 x 4 mm thick. They have a series of “V” pressed welded at nominal 500 mm on the tube to provide a location for ledger and transoms. Products are manufactured to Australian Standard AS1576. Painted.
Steel Pallet Quantities: 0.3m – 200, 0.5m – 200, 1.0m – 100, 1.5m – 100, 2.0m – 100, 2.5m – 70, 3.0m – 70

HEIGHT WIDTH LENGTH WEIGHT
3.0mm 48mm 48mm 15.3kg
CODE:SCA21.2604.300.003
PRICE:$68.50 +GST

  Image 11                                                                             STANDARD 2.0M INTERMEDIATE

Verticals form the support or the uprights and are made from Standard Scaffold Tubes of 48.3 x 4 mm thick. They have a series of “V” pressed welded at nominal 500 mm on the tube to provide a location for ledger and transoms. Products are manufactured to Australian Standard AS1576. Painted.
Steel Pallet Quantities: 0.3m – 200, 0.5m – 200, 1.0m – 100, 1.5m – 100, 2.0m – 100, 2.5m – 70, 3.0m – 70

HEIGHT WIDTH LENGTH WEIGHT
2.0mm 48mm 48mm 11.4kg
CODE:SCA21.2606.200.003
PRICE:$30.54 + GST

  Image 12                                                                             LEDGER 0.5M

These items are made from tube with a cast wedge-fixing device at each ends. These are used to lie in the uprights or standards longitudinally. On the inside of the scaffold of the scaffold they are used at platform level and on the outside as a guardrail. Products are manufactured to Australian Standard AS1576.
Steel Pallet Quantities: 0.73m – 220, 1.00m – 110, 1.27m – 110, 1.50m – 110, 1.83m – 110, 2.44m – 120, 3.00m – 120

HEIGHT WIDTH LENGTH WEIGHT
0.5mm 48mm 48mm 3.2kg
CODE:SCA21.2607.050.003
PRICE: $13.00 + GST

  Image 13                                                                             LEDGER 0.73M

These items are made from tube with a cast wedge-fixing device at each ends. These are used to lie in the uprights or standards longitudinally. On the inside of the scaffold of the scaffold they are used at platform level and on the outside as a guardrail. Products are manufactured to Australian Standard AS1576.
Steel Pallet Quantities: 0.73m – 220, 1.00m – 110, 1.27m – 110, 1.50m – 110, 1.83m – 110, 2.44m – 120, 3.00m – 120

HEIGHT WIDTH LENGTH WEIGHT
0.73mm 48mm 48mm 3.2kg
CODE:SCA21.2607.073.003
PRICE: $17.14 + GST

  Image 14                                                                             LEDGER 1.00M

These items are made from tube with a cast wedge-fixing device at each ends. These are used to lie in the uprights or standards longitudinally. On the inside of the scaffold of the scaffold they are used at platform level and on the outside as a guardrail. Products are manufactured to Australian Standard AS1576.
Steel Pallet Quantities: 0.73m – 220, 1.00m – 110, 1.27m – 110, 1.50m – 110, 1.83m – 110, 2.44m – 120, 3.00m – 120.

HEIGHT WIDTH LENGTH WEIGHT
1.0mm 48mm 48mm 4.0kg
CODE:SCA21.2607.100.003
PRICE: $24.00 + GST

  Image 15                                                                             LEDGER 1.27M

These items are made from tube with a cast wedge-fixing device at each ends. These are used to lie in the uprights or standards longitudinally. On the inside of the scaffold of the scaffold they are used at platform level and on the outside as a guardrail. Products are manufactured to Australian Standard AS1576.
Steel Pallet Quantities: 0.73m – 220, 1.00m – 110, 1.27m – 110, 1.50m – 110, 1.83m – 110, 2.44m – 120, 3.00m – 120

HEIGHT WIDTH LENGTH WEIGHT
1.27mm 48mm 48mm 4.9kg
CODE:SCA21.2607.127.003
PRICE:$24.00 +GST

  Image 16                                                                             LEDGER 1.83M

These items are made from tube with a cast wedge-fixing device at each ends. These are used to lie in the uprights or standards longitudinally. On the inside of the scaffold of the scaffold they are used at platform level and on the outside as a guardrail. Products are manufactured to Australian Standard AS1576.
Steel Pallet Quantities: 0.73m – 220, 1.00m – 110, 1.27m – 110, 1.50m – 110, 1.83m – 110, 2.44m – 120, 3.00m – 120

HEIGHT WIDTH LENGTH WEIGHT
1.83mm 48mm 48mm 6.8kg
CODE:SCA21.2607.183.003
PRICE: $27.30 + GST

  Image 17                                                                             LEDGER 2.44M

These items are made from tube with a cast wedge-fixing device at each ends. These are used to lie in the uprights or standards longitudinally. On the inside of the scaffold of the scaffold they are used at platform level and on the outside as a guardrail. Products are manufactured to Australian Standard AS1576.
Steel Pallet Quantities: 0.73m – 220, 1.00m – 110, 1.27m – 110, 1.50m – 110, 1.83m – 110, 2.44m – 120, 3.00m – 120

HEIGHT WIDTH LENGTH WEIGHT
2.44mm 48mm 48mm 9.2kg
CODE:SCA21.2607.244.003
PRICE: $36.00 + GST

  Image 18                                                                             LEDGER 3.00M

These items are made from tube with a cast wedge-fixing device at each ends. These are used to lie in the uprights or standards longitudinally. On the inside of the scaffold of the scaffold they are used at platform level and on the outside as a guardrail. Products are manufactured to Australian Standard AS1576.
Steel Pallet Quantities: 0.73m – 220, 1.00m – 110, 1.27m – 110, 1.50m – 110, 1.83m – 110, 2.44m – 120, 3.00m – 120

HEIGHT WIDTH LENGTH WEIGHT
3.0mm 48mm 48mm 10.8kg
CODE:SCA21.2607.300.003
PRICE: $52.12 + GST

  Image 19                                                                             TRANSOM 0.50M

Transoms fit into the lower “V” pressings on the standards to carry steel boards.
Steel Pallet Quantities: 0.50m – 200, 0.83m – 200, 1.00m – 100, 1.27m – 80, 1.83m – 50, 2.44m – 50, 3.00m – 50

HEIGHT WIDTH LENGTH WEIGHT
0.50mm 100mm 50mm 4.00kg
CODE:SCA21.2613.050.003
PRICE: $15.52 + GST

  Image 20                                                                             TRANSOM 0.73M

Transoms fit into the lower “V” pressings on the standards to carry steel boards.
Steel Pallet Quantities: 0.50m – 200, 0.83m – 200, 1.00m – 100, 1.27m – 80, 1.83m – 50, 2.44m – 50, 3.00m – 50

HEIGHT WIDTH LENGTH WEIGHT
0.73mm 100mm 50mm 5.4kg
CODE:SCA21.2613.073.003
PRICE:$24.00 +GST

  Image 21                                                                             TRANSOM 1.0M

Image 21

Drop forged galvanised coupler, made of two parts which turn independently, single unit design, easily replaceable bolts, principally used for bracing and allowing tubes to be connected at any angle.

HEIGHT WIDTH LENGTH WEIGHT
51mm 51mm 100mm 1.50kg
CODE:SCA30.4702.051.003
PRICE:$17.52 +GST

  Image 22                                                                             TRANSOM 1.27M

Transoms fit into the lower “V” pressings on the standards to carry steel boards.
Steel Pallet Quantities: 0.50m – 200, 0.83m – 200, 1.00m – 100, 1.27m – 80, 1.83m – 50, 2.44m – 50, 3.00m – 50.

HEIGHT WIDTH LENGTH WEIGHT
1.27mm 100mm 50mm 9.0kg
CODE:SCA21.2613.127.003
PRICE: $36.00 + GST

  Image 23                                                                             TRANSOM 1.83M

Transoms fit into the lower “V” pressings on the standards to carry steel boards.
Steel Pallet Quantities: 0.50m – 200, 0.83m – 200, 1.00m – 100, 1.27m – 80, 1.83m – 50, 2.44m – 50, 3.00m – 50

HEIGHT WIDTH LENGTH WEIGHT
1.83mm 100mm 50mm 16.2kg
CODE:SCA21.2613.183.003
PRICE: $62.24 + GST

  Image 24                                                                             TRANSOM 2.44M

Transoms fit into the lower “V” pressings on the standards to carry steel boards.
Steel Pallet Quantities: 0.50m – 200, 0.83m – 200, 1.00m – 100, 1.27m – 80, 1.83m – 50, 2.44m – 50, 3.00m – 50.

HEIGHT WIDTH LENGTH WEIGHT
2.44mm 100mm 50mm 22.3kg
CODE:SCA21.2613.244.003
PRICE: $90.16 + GST

  Image 25                                                                             TRANSOM 3.0M

Transoms fit into the lower “V” pressings on the standards to carry steel boards.
Steel Pallet Quantities: 0.50m – 200, 0.83m – 200, 1.00m – 100, 1.27m – 80, 1.83m – 50, 2.44m – 50, 3.00m – 50

HEIGHT WIDTH LENGTH WEIGHT
3.0mm 100mm 50mm 27.87kg
CODE:SCA21.2613.300.003
PRICE: $130.00 + GST

  Image 26                                                                             STEEL GALVANISED BOARD 0.73M

Steel Planks are made with Pre-Galvanised Perforated Steel, available in various sizes.

HEIGHT WIDTH LENGTH WEIGHT
.730mm 230mm 62mm 4.40kg
CODE:SCA21.3880.076.003
PRICE: $18.00 + GST

  Image 27                                                                             STEEL GALVANISED BOARD 1.00M

Steel Planks are made with Pre-Galvanised Perforated Steel, available in various sizes..

HEIGHT WIDTH LENGTH WEIGHT
1.0mm 230mm 62mm 6.23kg
CODE:SCA21.3880.100.003
PRICE: $22.00 + GST

  Image 28                                                                             STEEL GALVANISED BOARD 1.27M

Steel Planks are made with Pre-Galvanised Perforated Steel, available in various sizes.

HEIGHT WIDTH LENGTH WEIGHT
1.27mm 230mm 62mm 7.30kg
CODE:SCA21.3880.127.003
PRICE: $26.40 + GST

  Image 29                                                                             STEEL GALVANISED BOARD 1.50M

Steel Planks are made with Pre-Galvanised Perforated Steel, available in various sizes.

HEIGHT WIDTH LENGTH WEIGHT
1.5mm 230mm 62mm 9.35kg
CODE:SCA21.3880.150.003
PRICE: $31.80 + GST

  Image 30                                                                             STEEL GALVANISED BOARD 1.83M

Steel Planks are made with Pre-Galvanised Perforated Steel, available in various sizes.

HEIGHT WIDTH LENGTH WEIGHT
1.83mm 230mm 62mm 10.80kg
CODE:SCA21.3880.183.003
PRICE: $37.72 + GST

  Image 31                                                                             STEEL GALVANISED BOARD 2.44M

Steel Planks are made with Pre-Galvanised Perforated Steel, available in various sizes.

HEIGHT WIDTH LENGTH WEIGHT
2.44mm 230mm 62mm 14.60kg
CODE:SCA21.3880.244.003
PRICE: $46.00 + GST

  Image 32                                                                             STEEL GALVANISED BOARD 3.00M

Steel Planks are made with Pre-Galvanised Perforated Steel, available in various sizes

HEIGHT WIDTH LENGTH WEIGHT
3.0mm 230mm 62mm 18.70kg
CODE:SCA21.3880.300.003
PRICE: $72.68 + GST

  Image 33                                                                             DIAGONAL BRACE 1.25M

The diagonal brace is used to the full height of the scaffolding in a longitudinal direction.

A fitting designed for joining beam and tube (It is also named as Beam Clamp). NOTE: These couplers must be used in pairs.

HEIGHT WIDTH LENGTH WEIGHT
1.25mm 48mm 48mm 6.86kg
CODE:SCA21.2620.125.003
PRICE: $26.00 + GST

  Image 34                                                                             DIAGONAL BRACE 1.7M

The diagonal brace is used to the full height of the scaffolding in a longitudinal direction.

HEIGHT WIDTH LENGTH WEIGHT
1.7mm 48mm 48mm 6.86kg
CODE:SCA21.2620.170.003
PRICE: $39.20 + GST

  Image 35                                                                             DIAGONAL BRACE 2.0M

The diagonal brace is used to the full height of the scaffolding in a longitudinal direction.

HEIGHT WIDTH LENGTH WEIGHT
2.0mm 48mm 48mm 8kg
CODE:SCA21.2620.200.003
PRICE: $36.00 + GST

  Image 36                                                                             DIAGONAL BRACE 2.7M

The diagonal brace is used to the full height of the scaffolding in a longitudinal direction.

HEIGHT WIDTH LENGTH WEIGHT
2.7mm 48mm 48mm 10.5kg
CODE:SCA21.2620.270.003
PRICE: $43.50 + GST

  Image 37                                                                             DIAGONAL BRACE 3.2M

The diagonal brace is used to the full height of the scaffolding in a longitudinal direction.

HEIGHT WIDTH LENGTH WEIGHT
3.2mm 48mm 48mm 11.9kg
CODE: SCA21.2620.320.003
PRICE: $ 51.32 + GST

  Image 38                                                                             DIAGONAL BRACE 3.6M

The diagonal brace is used to the full height of the scaffolding in a longitudinal direction.

HEIGHT WIDTH LENGTH WEIGHT
3.6mm 48mm 48mm 13kg
CODE:SCA21.2620.360.003
PRICE: $52.00 + GST

  Image 39                                                                             1 BOARD STAGE BRACKET

Board Stage Brackets / hopups fit into the “V” pressing of the standard which is nearest to the wall. The 2 have holes into which tie bar pins are attached. They are used to provide cantilevered platform on the inside of the scaffold nearest the wall.

HEIGHT WIDTH LENGTH WEIGHT
.510mm 100mm 230mm 2.2kg
CODE:SCA21.2630.001.003
PRICE: $13.80 + GST

  Image 40                                                                             2 BOARD STAGE BRACKET

Board Stage Brackets / hopups fit into the “V” pressing of the standard which is nearest to the wall. The 2 have holes into which tie bar pins are attached. They are used to provide cantilevered platform on the inside of the scaffold nearest the wall.

HEIGHT WIDTH LENGTH WEIGHT
.510mm 100mm 460mm 5.5kg
CODE:SCA21.2630.002.003
PRICE: $29.00 + GST

  Image 41                                                                             3 BOARD STAGE BRACKET WITH SPIGOT

Board Stage Brackets / hopups fit into the “V” pressing of the standard which is nearest to the wall. The 2 have holes into which tie bar pins are attached. They are used to provide cantilevered platform on the inside of the scaffold nearest the wall.

HEIGHT WIDTH LENGTH WEIGHT
.510mm 100mm 730mm 11kg
CODE:SCA21.2630.003.003
PRICE: $47.94 + GST

  Image 42                                                                             KWIKSTAGE TIE BAR 0.73M

Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets spreading and the planks from becoming dislodged.
Steel Pallet Quantities: 250

HEIGHT WIDTH LENGTH WEIGHT
40mm 40mm 730mm 1.8kg
CODE:SCA21.2250.073.003
PRICE: $11.40 + GST

  Image 43                                                                             KWIKSTAGE TIE BAR 1.0M

Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets spreading and the planks from becoming dislodged.
Steel Pallet Quantities: 250

HEIGHT WIDTH LENGTH WEIGHT
40mm 40mm 1000mm 2.5kg
CODE:SCA21.2250.100.003
PRICE: $ POA

  Image 44                                                                             KWIKSTAGE TIE BAR 1.27M

Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets spreading and the planks from becoming dislodged.
Steel Pallet Quantities: 250

HEIGHT WIDTH LENGTH WEIGHT
40mm 40mm 1270mm 3kg
CODE:SCA21.2250.127.003
PRICE: $15.60 + GST

  Image 45                                                                             KWIKSTAGE TIE BAR 1.83M

Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets spreading and the planks from becoming dislodged.
Steel Pallet Quantities: 250

HEIGHT WIDTH LENGTH WEIGHT
40mm 40mm 1830mm 4.4kg
CODE:SCA21.2250.183.003
PRICE: $19.14 + GST

  Image 46                                                                             KWIKSTAGE TIE BAR 2.44M

Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets spreading and the planks from becoming dislodged.
Steel Pallet Quantities: 250

HEIGHT WIDTH LENGTH WEIGHT
40mm 40mm 2440mm 5.7kg
CODE:SCA21.2250.244.003
PRICE: $23.70 + GST

  Image 47                                                                             KWIKSTAGE TIE BAR 3.00M

Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets spreading and the planks from becoming dislodged.
Steel Pallet Quantities: 250

HEIGHT WIDTH LENGTH WEIGHT
40mm 40mm 3000mm 5,7kg
CODE: SCA21.2250.300.003
PRICE: $30.00 + GST

  Image 48                                                                             INTERNAL CORNER FILLERS (ICF)

Internal Corner Fillers (ICF) are used in tandem with Hop Up Brackets to fill any corner gaps that may occur in the scaffold’s design.

HEIGHT WIDTH LENGTH WEIGHT
0.100mm 480mm 480mm 9.57kg
CODE:SCA21.2630.004.003
PRICE: $60.00 + GST

  Image 49                                                                             KWIKSTAGE TOE BOARD CLIP

Clamps to the standard with a captive wedge to hold the batten toe board vertically in place.

HEIGHT WIDTH LENGTH WEIGHT
0.050mm 50mm 120mm 0.70kg
CODE:SCA21.4708.001.003
PRICE: $6.00 + GST

  Image 50                                                                             KWIKSTAGE END TOE BOARD CLIP

Clamps to the standard with a captive wedge to hold the batten toe board vertically in place at the tranverse end of scaffold.

HEIGHT WIDTH LENGTH WEIGHT
0.050mm 50mm 120mm 9.00kg
CODE:SCA21.4708.002.003
PRICE: $9.00 + GST

  Image 51                                                                             LADDER TRANSOM 0.73M

Clamps on to ledgers to allow 1.2 metre steel boards to sit in. Allowing sufficient room for ladder access.

HEIGHT WIDTH LENGTH WEIGHT
0.730mm 100mm 50mm 5.4kg
CODE:SCA21.1313.073.003
PRICE: $37.00 + GST

  Image 52                                                                             LADDER TRANSOM 1.27M

Clamps on to ledgers to allow 1.2 metre steel boards to sit in. Allowing sufficient room for ladder access.

HEIGHT WIDTH LENGTH WEIGHT
1.270mm 100mm 50mm 9.00kg
CODE:SCA21.1313.127.003
PRICE: $41.50 + GST

  Image 53                                                                             LADDER TRANSOM 1.83M

Clamps on to ledgers to allow 1.2 metre steel boards to sit in. Allowing sufficient room for ladder access.

HEIGHT WIDTH LENGTH WEIGHT
1.830mm 100mm 50mm 16.2kg
CODE:SCA21.1313.183.003
PRICE: $61.84 + GST

  Image 54                                                                             LADDER TRANSOM 2.44M

Clamps on to ledgers to allow 1.2 metre steel boards to sit in. Allowing sufficient room for ladder access.

HEIGHT WIDTH LENGTH WEIGHT
2.440mm 100mm 50mm 22.3kg
CODE:SCA21.1313.244.003
PRICE:$77.00 +GST

  Image 55                                                                             MESH GUARD 0.73M

To prevent brick and rubble falling from scaffold.

HEIGHT WIDTH LENGTH WEIGHT
1.0M 55mm 730mm .45kg
CODE:SCA21.7262.073.003
PRICE: $50.00 + GST

  Image 56                                                                             MESH GUARD 1.27M

To prevent brick and rubble falling from scaffold.

HEIGHT WIDTH LENGTH WEIGHT
1.0M 55mm 1270mm 9.10kg
CODE:SCA21.7262.127.003
PRICE: $62.00 + GST

  Image 57                                                                             MESH GUARD 1.83M

To prevent brick and rubble falling from scaffold.

HEIGHT WIDTH LENGTH WEIGHT
1.0M 55mm 1830mm 12.10kg
CODE:SCA21.7262.183.003
PRICE: $66.00 + GST

  Image 58                                                                             MESH GUARD 2.44M

To prevent brick and rubble falling from scaffold.

HEIGHT WIDTH LENGTH WEIGHT
1.0M 55mm 2440mm 15.30kg
CODE:SCA22.7262.244.003
PRICE: $125.00 + GST

  Image 59                                                                             PLATFORM STAIR HANDRAIL 1.5M

HEIGHT WIDTH LENGTH WEIGHT
mm mm mm 6.00kg
CODE:SCA01.2638.244.003
PRICE: $180.00 + GST

  Image 60                                                                             KWIKSTAGE EXIT POST

HEIGHT WIDTH LENGTH WEIGHT
/td>
CODE:SCA01.2638.100.003
PRICE: $140.00 + GST

  Image 61                                                                             SCAFFOLD LYTA MESH

Lyta Mesh is an innovative new product for containment screening and fall-arrest to replace your old chain wire and shade cloth . Simple to install – Save up to 50% of your time on installation and money for labour with Lyta Mesh. No more chain wire to de-tangle, just tie on and roll out. On dismantle, cut ties and roll back to a neat space saving roll. Can be easily attached with tie wire or clips.

HEIGHT WIDTH LENGTH WEIGHT
1900mm mm 15mm 22kg
CODE:BAR44.1500.190.034
PRICE:$285.00+GST

  Image 62                                                                             SCAFF-HOLD CLIP TOOL

Using the Scaff-Hold system, boards can be secured by 1 person in half the time of traditional methods. Purchase tool and clips at Scaff-Hold.com

HEIGHT WIDTH LENGTH WEIGHT
PRICE:$76.95+GST
Subscribe to our newsletter and keep up to date with specials, industry new, safety standards, technical information and more.