KWIKSTAGE SCAFFOLD ITEMS

Kwikstage scaffold is a Modular System which is the most commonly scaffold used in Australia due to the systems flexibility, strength, being easy to install and dismantle. Australian Scaffolds has a range of Kwikstage Scaffold for sale and we freight to all parts of Australia with fast transit times.

  Image 1                                                                                SOLEBOARD

Soleboards are either hardwood timber planks or LVL timber planks used under the standards to provide greater load bearing capacity. Make sure the base (ground) is firm and free of debris in the area of setup. When erecting scaffold on soil use sole boards (scaffold planks not less than 220mm wide). If the ground is not level use screw jacks. If jacks are not needed, always use base plates where the scaffold is erected on sole boards or where a concrete surface can be damaged. A scaffold must not be erected on soft ground or unconsolidated soil.

HEIGHT WIDTH LENGTH WEIGHT
38mm 230mm 500mm 4.00kg
CODE: SCA40.3300.050.003
PRICE: $8.00 + GST

  Image 2                                                                                STANDARD 0.3M NO SPIGOT

Standards form the vertical supports and are made from 48.3mm diameter scaffold tube. They have a series of “V” presses welded at nominal 500mm centres on the tube to provide a location for ledgers and transoms. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.3m – 200, 0.5m – 200, 1.0m – 100, 1.5m – 100, 2.0m – 100, 2.5m – 70, 3.0m – 70

HEIGHT WIDTH LENGTH WEIGHT
300mm 48mm 48mm 1.50kg
CODE: SCA22.2604.030.003
PRICE: $10.00 + GST

  Image 3                                                                                STANDARD 0.5M

Standards form the vertical supports and are made from 48.3mm diameter scaffold tube. They have a series of “V” presses welded at nominal 500mm centres on the tube to provide a location for ledgers and transoms. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.3m – 200, 0.5m – 200, 1.0m – 100, 1.5m – 100, 2.0m – 100, 2.5m – 70, 3.0m – 70

HEIGHT WIDTH LENGTH WEIGHT
500mm 48mm 48mm 2.30kg
CODE: SCA22.2604.050.003
PRICE: $14.00 + GST

  Image 4                                                                                STANDARD 1.0M

Standards form the vertical supports and are made from 48.3mm diameter scaffold tube. They have a series of “V” presses welded at nominal 500mm centres on the tube to provide a location for ledgers and transoms. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.3m – 200, 0.5m – 200, 1.0m – 100, 1.5m – 100, 2.0m – 100, 2.5m – 70, 3.0m – 70

HEIGHT WIDTH LENGTH WEIGHT
1000mm 48mm 48mm 4.50kg
CODE: SCA22.2604.100.003
PRICE:$24.00 +GST

  Image 5                                                                                STANDARD 1.5M

Standards form the vertical supports and are made from 48.3mm diameter scaffold tube. They have a series of “V” presses welded at nominal 500mm centres on the tube to provide a location for ledgers and transoms. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.3m – 200, 0.5m – 200, 1.0m – 100, 1.5m – 100, 2.0m – 100, 2.5m – 70, 3.0m – 70

HEIGHT WIDTH LENGTH WEIGHT
1500mm 48mm 48mm 7.56kg
CODE: SCA22.2604.150.003
PRICE: $31.48 + GST

  Image 6                                                                                STANDARD 2.0M

Standards form the vertical supports and are made from 48.3mm diameter scaffold tube. They have a series of “V” presses welded at nominal 500mm centres on the tube to provide a location for ledgers and transoms. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.3m – 200, 0.5m – 200, 1.0m – 100, 1.5m – 100, 2.0m – 100, 2.5m – 70, 3.0m – 70

HEIGHT WIDTH LENGTH WEIGHT
2000mm 48mm 48mm 11.40kg
CODE: SCA22.2604.200.003
PRICE:$40.00 +GST

  Image 7                                                                                STANDARD 2.5M

Standards form the vertical supports and are made from 48.3mm diameter scaffold tube. They have a series of “V” presses welded at nominal 500mm centres on the tube to provide a location for ledgers and transoms. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.3m – 200, 0.5m – 200, 1.0m – 100, 1.5m – 100, 2.0m – 100, 2.5m – 70, 3.0m – 70/p>

HEIGHT WIDTH LENGTH WEIGHT
2500mm 48mm 48mm 12.95kg
CODE: SCA22.2604.250.003
PRICE: $48.60 + GST

  Image 8                                                                                STANDARD 3.0M

Standards form the vertical supports and are made from 48.3mm diameter scaffold tube. They have a series of “V” presses welded at nominal 500mm centres on the tube to provide a location for ledgers and transoms. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.3m – 200, 0.5m – 200, 1.0m – 100, 1.5m – 100, 2.0m – 100, 2.5m – 70, 3.0m – 70

HEIGHT WIDTH LENGTH WEIGHT
2590mm 48mm 48mm 15.30kg
CODE: SCA22.2604.300.003
PRICE: $68.00 + GST

  Image 9                                                                                STANDARD 2.0M INTERMEDIATE

Standards form the vertical supports and are made from 48.3mm diameter scaffold tube. They have a series of “V” presses welded at nominal 500mm centres on the tube to provide a location for ledgers and transoms. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.3m – 200, 0.5m – 200, 1.0m – 100, 1.5m – 100, 2.0m – 100, 2.5m – 70, 3.0m – 70

HEIGHT WIDTH LENGTH WEIGHT
2500mm 48mm 48mm 11.40kg
CODE: SCA22.2606.200.003
PRICE:$37.00 +GST

  Image 10                                                                             LEDGER 0.73M

Ledgers are made from 48.3mm scaffold tube with a cast wedge-fixing device at each end. These are used to tie in the standards longitudinally. On the inside of the scaffold of the scaffold they are used at platform level and on the outside as a guardrail. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.73m – 220, 1.00m – 110, 1.27m – 110, 1.50m – 110, 1.83m – 110, 2.44m – 120, 3.00m – 120

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 730mm 3.20kg
CODE: SCA22.2607.073.003
PRICE:$15.50 +GST

  Image 11                                                                             LEDGER 1.00M

Ledgers are made from 48.3mm scaffold tube with a cast wedge-fixing device at each end. These are used to tie in the standards longitudinally. On the inside of the scaffold of the scaffold they are used at platform level and on the outside as a guardrail. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.73m – 220, 1.00m – 110, 1.27m – 110, 1.50m – 110, 1.83m – 110, 2.44m – 120, 3.00m – 120

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 1000mm 4.00kg
CODE: SCA22.2607.100.003
PRICE:$16.00+GST

  Image 12                                                                             LEDGER 1.27M

Ledgers are made from 48.3mm scaffold tube with a cast wedge-fixing device at each end. These are used to tie in the standards longitudinally. On the inside of the scaffold of the scaffold they are used at platform level and on the outside as a guardrail. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.73m – 220, 1.00m – 110, 1.27m – 110, 1.50m – 110, 1.83m – 110, 2.44m – 120, 3.00m – 120

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 1270mm 4.90kg
CODE: SCA22.2607.127.003
PRICE:$17.50 +GST

  Image 13                                                                             LEDGER 1.83M

Ledgers are made from 48.3mm scaffold tube with a cast wedge-fixing device at each end. These are used to tie in the standards longitudinally. On the inside of the scaffold of the scaffold they are used at platform level and on the outside as a guardrail. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.73m – 220, 1.00m – 110, 1.27m – 110, 1.50m – 110, 1.83m – 110, 2.44m – 120, 3.00m – 120

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 1830mm 6.80kg
CODE: SCA22.2607.183.003
PRICE:$23.26 +GST

  Image 14                                                                             LEDGER 2.44M

Ledgers are made from 48.3mm scaffold tube with a cast wedge-fixing device at each end. These are used to tie in the standards longitudinally. On the inside of the scaffold of the scaffold they are used at platform level and on the outside as a guardrail. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.73m – 220, 1.00m – 110, 1.27m – 110, 1.50m – 110, 1.83m – 110, 2.44m – 120, 3.00m – 120

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 2440mm 9.20kg
CODE: SCA22.2607.244.003/td>
PRICE:$29.00+GST

  Image 15                                                                             LEDGER 3.00M

Ledgers are made from 48.3mm scaffold tube with a cast wedge-fixing device at each end. These are used to tie in the standards longitudinally. On the inside of the scaffold of the scaffold they are used at platform level and on the outside as a guardrail. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.73m – 220, 1.00m – 110, 1.27m – 110, 1.50m – 110, 1.83m – 110, 2.44m – 120, 3.00m – 120

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 3000mm 10.80kg
CODE: SCA22.2607.300.003
PRICE:$45.50 +GST

  Image 16                                                                             TRANSOM 0.50M

Transoms fit into the lower “V” pressings on the standards to carry steel boards and secure the standards together. The transoms are installed horizontally and at 90 degrees to the ledger. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.50m – 200, 0.83m – 200, 1.00m – 100, 1.27m – 80, 1.83m – 50, 2.44m – 50, 3.00m – 50

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 500mm 4.08kg
CODE: SCA22.2613.050.003
PRICE:$16.50 +GST

  Image 17                                                                             TRANSOM 0.76M

Transoms fit into the lower “V” pressings on the standards to carry steel boards and secure the standards together. The transoms are installed horizontally and at 90 degrees to the ledger. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.50m – 200, 0.83m – 200, 1.00m – 100, 1.27m – 80, 1.83m – 50, 2.44m – 50, 3.00m – 50

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 760mm 5.40kg
CODE: SCA22.2613.076.003
PRICE:$19.00+GST

  Image 18                                                                             TRANSOM 1.00M

Transoms fit into the lower “V” pressings on the standards to carry steel boards and secure the standards together. The transoms are installed horizontally and at 90 degrees to the ledger. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.50m – 200, 0.83m – 200, 1.00m – 100, 1.27m – 80, 1.83m – 50, 2.44m – 50, 3.00m – 50

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 1000mm 7.20kg
CODE: SCA22.2613.100.003
PRICE:$24.50 +GST

  Image 19                                                                             TRANSOM 1.27M

Transoms fit into the lower “V” pressings on the standards to carry steel boards and secure the standards together. The transoms are installed horizontally and at 90 degrees to the ledger. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.50m – 200, 0.83m – 200, 1.00m – 100, 1.27m – 80, 1.83m – 50, 2.44m – 50, 3.00m – 50

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 1270mm 9.00kg
CODE: SCA22.2613.127.003
PRICE:$29.72 +GST

  Image 20                                                                             TRANSOM 1.83M

Transoms fit into the lower “V” pressings on the standards to carry steel boards and secure the standards together. The transoms are installed horizontally and at 90 degrees to the ledger. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.50m – 200, 0.83m – 200, 1.00m – 100, 1.27m – 80, 1.83m – 50, 2.44m – 50, 3.00m – 50

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 1830mm 16.20kg
CODE: SCA22.2613.183.003
PRICE:$58.40 +GST

  Image 21                                                                             TRANSOM 2.44M

Transoms fit into the lower “V” pressings on the standards to carry steel boards and secure the standards together. The transoms are installed horizontally and at 90 degrees to the ledger. Products are manufactured to Australian Standard AS1576.

Steel Pallet Quantities:

0.50m – 200, 0.83m – 200, 1.00m – 100, 1.27m – 80, 1.83m – 50, 2.44m – 50, 3.00m – 50

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 2440mm 23.30kg
CODE: SCA22.2613.244.003
PRICE:$76.90 +GST

  Image 22                                                                             STEEL BOARD 0.73M

Each end of the steel board is supported by the transoms and forms the platform. Working platforms are generally rated light – 225 kgs, medium – 450 kgs and heavy duty – 675 kgs per full-width platform per bay. Load limits include the weight of workers. Products are manufactured to Australian Standard AS1576.

Timber Pallet Quantities: 100

HEIGHT WIDTH LENGTH WEIGHT
62mm 230mm 730mm 4.40kg
CODE: SCA21.3880.076.003
PRICE:$18.00 +GST

  Image 23                                                                             STEEL BOARD 1.00M

Each end of the steel board is supported by the transoms and forms the platform. Working platforms are generally rated light – 225 kgs, medium – 450 kgs and heavy duty – 675 kgs per full-width platform per bay. Load limits include the weight of workers. Products are manufactured to Australian Standard AS1576.

Timber Pallet Quantities: 50

HEIGHT WIDTH LENGTH WEIGHT
62mm 230mm 1000mm 6.23kg
CODE: SCA21.3880.100.003
PRICE:$22.00 +GST

  Image 24                                                                             STEEL BOARD 1.27M

Each end of the steel board is supported by the transoms and forms the platform. Working platforms are generally rated light – 225 kgs, medium – 450 kgs and heavy duty – 675 kgs per full-width platform per bay. Load limits include the weight of workers. Products are manufactured to Australian Standard AS1576.

Timber Pallet Quantities: 50

HEIGHT WIDTH LENGTH WEIGHT
62mm 230mm 1270mm 9.35kg
CODE: SCA21.3880.127.003
PRICe:26.40 +GST

  Image 25                                                                             STEEL BOARD 1.83M

Each end of the steel board is supported by the transoms and forms the platform. Working platforms are generally rated light – 225 kgs, medium – 450 kgs and heavy duty – 675 kgs per full-width platform per bay. Load limits include the weight of workers. Products are manufactured to Australian Standard AS1576.

Timber Pallet Quantities: 50

HEIGHT WIDTH LENGTH WEIGHT
62mm 230mm 1830mm 10.83kg
CODE: SCA21.3880.183.003
PRICE:$37.72 +GST

  Image 26                                                                             STEEL BOARD 2.44M

Each end of the steel board is supported by the transoms and forms the platform. Working platforms are generally rated light – 225 kgs, medium – 450 kgs and heavy duty – 675 kgs per full-width platform per bay. Load limits include the weight of workers. Products are manufactured to Australian Standard AS1576.

Timber Pallet Quantities: 50

HEIGHT WIDTH LENGTH WEIGHT
62mm 230mm 2440mm 14.60kg
CODE: SCA21.3880.244.003
PRICE:$44.50 +GST

  Image 27                                                                             STEEL BOARD 3.00M

Each end of the steel board is supported by the transoms and forms the platform. Working platforms are generally rated light – 225 kgs, medium – 450 kgs and heavy duty – 675 kgs per full-width platform per bay. Load limits include the weight of workers. Products are manufactured to Australian Standard AS1576.

Timber Pallet Quantities: 50

HEIGHT WIDTH LENGTH WEIGHT
62mm 230mm 3000mm 18.70kg
CODE: SCA21.3880.300.003
PRICE:$72.68 +GST

  Image 28                                                                             DIAGONAL BRACE 1.70M

vertical members (standards) together. They square and align the legs so the scaffold stays plumb. They resist sway forces that result from horizontal loads imposed on scaffolds from wind and worker movement.

Diagonal brace 1.7m = 0.73 x 1.5m bay

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 1700mm 6.86kg
CODE: SCA22.2620.170.003
PRICE: $26.00 + GST

  Image 29                                                                             DIAGONAL BRACE 2.00M

A diagonal brace is a structural member used to strengthen a structure. They secure the
vertical members (standards) together. They square and align the legs so the scaffold stays plumb. They resist sway forces that result from horizontal loads imposed on scaffolds from wind and worker movement.

Diagonal brace 2.0m = 1.2 x 1.5m bay

<td48mm2000mm8.00kg

HEIGHT WIDTH LENGTH WEIGHT
48mm
CODE: SCA22.2620.200.003
PRICE:$36.10 +GST

  Image 30                                                                             DIAGONAL BRACE 2.70M

For clamping 48mm tube down to 33.7mm at any angle. Made in Germany.

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 2700mm 10.56kg
CODE: SCA22.2620.270.003
PRICE:$39.00 +GST

  Image 31                                                                             DIAGONAL BRACE 3.20M

A diagonal brace is a structural member used to strengthen a structure. They secure the
vertical members (standards) together. They square and align the legs so the scaffold stays plumb. They resist sway forces that result from horizontal loads imposed on scaffolds from wind and worker movement.

Diagonal brace 3.2m = 2.4 x 2.0m bay

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 3200mm 11.90kg
CODE: SCA22.2620.320.003
PRICE: $42.00 + GST

  Image 32                                                                             DIAGONAL BRACE 3.60M

A diagonal brace is a structural member used to strengthen a structure. They secure the
vertical members (standards) together. They square and align the legs so the scaffold stays plumb. They resist sway forces that result from horizontal loads imposed on scaffolds from wind and worker movement.

Diagonal brace 3.6m = 2.4 x 2.5m bay

HEIGHT WIDTH LENGTH WEIGHT
48mm 48mm 3600mm 13.00kg
CODE: SCA22.2620.360.003
PRICE: $46.50 + GST

  Image 33                                                                             1 BOARD HOP UP BRACKET

Stage board brackets provide an additional cantilevered working platform normally from the inside face of the scaffold.

The brackets are manufactured using two angle welded back to back form an inverted “T” section for board location, and are complete with a spigot captive wedge assembly for positive location to a “V” pressing on the standards.

A one board bracket may only be used at deck level on the inside face of the scaffold.

HEIGHT WIDTH LENGTH WEIGHT
48mm 250mm 48mm 2.20kg
CODE: SCA22.2630.001.003
PRICE:$10.00 +GST

  Image 34                                                                             2 BOARD HOP UP BRACKET

Stage board brackets provide an additional cantilevered working platform normally from the inside face of the scaffold.

The brackets are manufactured using two angle welded back to back form an inverted “T” section for board location, and are complete with a spigot captive wedge assembly for positive location to a “V” pressing on the standards.

HEIGHT WIDTH LENGTH WEIGHT
48mm 250mm 48mm 5.50kg
CODE: SCA22.2630.002.003
PRICE:$26.00 +GST

  Image 35                                                                             3 BOARD HOP UP BRACKET WITH SPIGOT

Stage board brackets provide an additional cantilevered working platform normally from the inside face of the scaffold.

The brackets are manufactured using two angle welded back to back form an inverted “T” section for board location, and are complete with a spigot captive wedge assembly for positive location to a “V” pressing on the standards.

HEIGHT WIDTH LENGTH WEIGHT
48mm 250mm 48mm 5.50kg
CODE: SCA22.2630.003.003
PRICE: $43.70 + GST

  Image 36                                                                             KWIKSTAGE TIE BAR 0.73M

Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets spreading and the planks from becoming dislodged.

Steel Pallet Quantities: 250

HEIGHT WIDTH LENGTH WEIGHT
40mm 40mm 730mm 1.80kg
CODE: SCA22.2504.073.003
PRICE:$9.90 +GST

  Image 37                                                                             KWIKSTAGE TIE BAR 1.00M

Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets spreading and the planks from becoming dislodged.

Steel Pallet Quantities: 250

HEIGHT WIDTH LENGTH WEIGHT
40mm 40mm 1000mm 2.50kg
CODE: SCA22.2504.100.003
PRICE:$11.30 +GST

  Image 38                                                                             KWIKSTAGE TIE BAR 1.27M

Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets spreading and the planks from becoming dislodged.

Steel Pallet Quantities: 250

HEIGHT WIDTH LENGTH WEIGHT
40mm 40mm 1270mm 3.00
CODE: SCA22.2504.127.003
PRICE:$13.56 +GST

  Image 39                                                                             KWIKSTAGE TIE BAR 1.83M

Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets spreading and the planks from becoming dislodged.

Steel Pallet Quantities: 250

HEIGHT WIDTH LENGTH WEIGHT
40mm 40mm 1830mm 4.40kg
CODE: SCA22.2504.183.003
PRICE:$16.44 +GST

  Image 40                                                                             KWIKSTAGE TIE BAR 2.44M

Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets spreading and the planks from becoming dislodged.

Steel Pallet Quantities: 250

HEIGHT WIDTH LENGTH WEIGHT
40mm 40mm 2440mm 5.70kg
CODE: SCA22.2504.244.003
PRICE:$20.42 +GST

  Image 41                                                                             INTERNAL CORNER FILLER – 2 X 2

Internal Corner Fillers (ICF) are used in tandem with Hop Up Brackets to fill any corner gaps that may occur in the scaffold’s design.

HEIGHT WIDTH LENGTH WEIGHT
100mm 480mm 480mm 9.57kg
CODE: SCA22.2630.004.003
PRICE:$53.00 +GST

  Image 42                                                                             TOE BOARD CLIP

A board on edge shall be fixed beneath the guard rail to form a toe board approximately 150mm above the deck level.

The toe board is secured by means of a toe board clip which is a stirrup shaped steel locating bracket complete with a captive wedge for fixing around a standard. each clip secures two boards end to end.

HEIGHT WIDTH LENGTH WEIGHT
50mm 50mm 120mm 0.70kg
CODE: SCA22.4708.001.003
PRICE:$5.77 +GST

  Image 43                                                                             TOE BOARD END CLIP

A board on edge shall be fixed beneath the guard rail to form a toe board approximately 150mm above the deck level.
Clamps to the standard with a captive wedge to hold the batten toe board vertically in place at the tranverse end of scaffold.

HEIGHT WIDTH LENGTH WEIGHT
50mm 50mm 120mm 0.70kg
CODE: SCA22.4708.002.003
PRICE:$11.00 +GST

  Image 44                                                                             LADDER TRANSOM 0.73M

The ladder transom is used to provide an opening for a ladder to pass through inside the scaffold, allowing for internal access. Clamps at 90 degrees to ledgers to allow 1.2 metre steel boards to sit in.

HEIGHT WIDTH LENGTH WEIGHT
50mm 100mm 730mm 5.00kg
CODE: SCA22.1313.073.003
PRICE:$28.00 +GST

  Image 45                                                                             LADDER TRANSOM 1.27M

The ladder transom is used to provide an opening for a ladder to pass through inside the scaffold, allowing for internal access. Clamps at 90 degrees to ledgers to allow 1.2 metre steel boards to sit in.

HEIGHT WIDTH LENGTH WEIGHT
50mm 100mm 1270mm 8.90kg
CODE: SCA22.1313.127.003
PRICE:$35.64 +GST

  Image 46                                                                             LADDER TRANSOM 1.83M

The ladder transom is used to provide an opening for a ladder to pass through inside the scaffold, allowing for internal access. Clamps at 90 degrees to ledgers to allow 1.2 metre steel boards to sit in.

HEIGHT WIDTH LENGTH WEIGHT
50mm 100mm 18.30mm 14.5kg
CODE: SCA22.1313.183.003
PRICE: $65.00 + GST

  Image 47                                                                             LADDER TRANSOM 2.44M

The ladder transom is used to provide an opening for a ladder to pass through inside the scaffold, allowing for internal access. Clamps at 90 degrees to ledgers to allow 1.2 metre steel boards to sit in.

HEIGHT WIDTH LENGTH WEIGHT
50mm 100mm 2440mm 20.00kg
CODE: SCA22.1313.244.003
PRICE:$84.00 +GST

  Image 48                                                                             PLATFORM STAIRS ALUMINIUM 1.5M

Aluminum Stairways are pre-fabricated set of stairs designed for use in a 1.2m x 2.4m bay providing 1.5m lift.

The stairs are 564mm wide with a stair rise of 230mm. Two stairways fit side by side in a 1.2m bay width locating on transoms members at each end.

HEIGHT WIDTH LENGTH WEIGHT
1500mm 600mm 2440mm 35.00kg
CODE: SCA01.1753.244.003
PRICE:$560.00 +GST

  Image 49                                                                             PLATFORM STAIR ALUMINIUM HANDRAIL 1.5M

The stair handrail follows the slope of the stair and is bolted to the inside face of the stair stringer

HEIGHT WIDTH LENGTH WEIGHT
1000mm 20mm 1500mm 6.00kg
CODE: SCA01.2638.244.003
PRICE:$180.00 +GST

  Image 50                                                                             PLATFORM EXIT RAIL 1.5M

The exit handrail is typically attached to the top aluminium stairway unit. It provides an extension to the Stairway Handrail at the landing level and is used to close off access through the bay or the open space adjacent to the top Stairway unit.

HEIGHT WIDTH LENGTH WEIGHT
1000mm 20mm 800mm 4.00kg
CODE: SCA01.2638.100.003
PRICE:$140.00 +GST

  Image 51                                                                             STEP DOWN BRACKET

The first step onto a stair access or ladder access is always difficult due to site constraints, ground levels and base outs. The use of the adjustable step down bracket gives the comfort of adjustment to balance the variables so the step becomes balanced when getting on or getting off a stair access at ground level. Painted.

HEIGHT WIDTH LENGTH WEIGHT
100mm 70mm 250mm 0.50kg
CODE: SCA22.2630.005.003
PRICE:$25.00 +GST

  Image 52                                                                             LADDER ACCESS HATCH

Used to cover hole in scaffold where ladder protrudes through the deck. Installs in less than 2 minutes, no extra components required.

HEIGHT WIDTH LENGTH WEIGHT
mm mm mm 8.10kg
CODE: SCA22.3837.400.003
PRICE:$110.00 +GST

  Image 53                                                                             STILLAGE – PAINTED

Used for holding materials. Safely picked up by forklift and stacks on top of each other. Painted.
Test Results: Pallets achieved a maximum load of 9000kgs. Client advised that these pallets are stacked 6 pallets high. Using a safety factor of 2, these pallets are rated to a Working Load Limit of 750kgs when stacked 6 units high.

HEIGHT WIDTH LENGTH WEIGHT
700mm 910mm 910mm 32.00kg
CODE: MAT01.5103.091.003
PRICE:$126.00 +GST

  Image 54                                                                             STILLAGE CAGE – PAINTED

Used for holding materials. Safely picked up by forklift and stacks on top of each other. Painted.
Test Results: Pallets achieved a maximum load of 9000kgs. Client advised that these pallets are stacked 6 pallets high. Using a safety factor of 2, these pallets are rated to a Working Load Limit of 750kgs when stacked 6 units high.

HEIGHT WIDTH LENGTH WEIGHT
700mm 910mm 910mm 38kg
CODE: MAT01.5105.091.003
PRICE:$330.00 +GST

  Image 55                                                                             SCAFFOLD TUBE CAP

Pack of 1
Bright Easy To See Colour
Cheap Yet Robust
Safely Protects Tube Ends
Protective Scaffold Caps increase public safety and workplace safety in the scaffolding industries.
Scaffold tube caps are also commonly known as: Scaffold caps, protection caps, cubby caps, end caps, tube caps, and yellow caps.

HEIGHT WIDTH LENGTH WEIGHT
mm mm mm kg
CODE:SCA50.4747.221.001
PRICE:$2.00 +GST

  Image 56                                                                             SCAFFOLD COUPLER CAPS

Pack 1000
Bright Easy To See Colour
Cheap Yet Robust
Safely Protects Tube Ends
Available For Fitting Bolts

HEIGHT WIDTH LENGTH WEIGHT
mm mm mm kg
CODE:SCA50.4747.217.012
PRICE:$248.00 +GST

  Image 57                                                                             SCAFFGUARDS

Pack 250
Multi-purpose Scaffold Caps
Provides protection from couplers and tube ends

HEIGHT WIDTH LENGTH WEIGHT
mm mm mm kg
CODE:SCA50.4747.218.012
PRICE:$338.00 +GST

  Image 58                                                                             SCAFFOAM 2M LENGTH

Hi-viz yellow impact protection for scaffolding, now being specified by local councils to provide pedestrian protection. Scaffoam has proven to be a reusable, very cost effective and time efficient safety enhancement for the scaffolding environment.

Pack 20
Supplied semi-split & Pre-formed.
Available in 400mm x 2m lengths.
UV Resistant.

HEIGHT WIDTH LENGTH WEIGHT
2000mm 40mm 400mm 1.10kg
CODE:TOO50.4747.221.012
PRICE: $59.08 + GST

  Image 59                                                                             SCAFFOAM 400MM LENGTH

Hi-viz yellow impact protection for scaffolding, now being specified by local councils to provide pedestrian protection. Scaffoam has proven to be a reusable, very cost effective and time efficient safetyenhancement for the scaffolding environment.

Supplied individually.
Supplied semi-split & Pre-formed.
Available in 400mm x 2m lengths.
UV Resistant.

HEIGHT WIDTH LENGTH WEIGHT
400mm 40mm 100mm
CODE:TOO44.4747.222.012
PRICE:$28.18+GST

  Image 60                                                                             ACCESS GATE

Ladder access gate attaches to 48mm OD vertical tube using supplied couplers. Springloaded for added safety and efficiency. Fitted mesh and toeboardfor full protection.

HEIGHT WIDTH LENGTH WEIGHT
1000mm 900mm 50mm 8.8kg
CODE:SCA22.2627.006.003
PRICE:$120.00+GST

  Image 61                                                                             SCAFFOLD LYTA MESH

Lyta Mesh is an innovative new product for containment screening and fall-arrest to replace your old chain wire and shade cloth . Simple to install – Save up to 50% of your time on installation and money for labour with Lyta Mesh. No more chain wire to de-tangle, just tie on and roll out. On dismantle, cut ties and roll back to a neat space saving roll. Can be easily attached with tie wire or clips.

HEIGHT WIDTH LENGTH WEIGHT
1900mm mm 15mm 22kg
CODE:BAR44.1500.190.034
PRICE:$285.00+GST

  Image 62                                                                             SCAFF-HOLD CLIP TOOL

Using the Scaff-Hold system, boards can be secured by 1 person in half the time of traditional methods. Purchase tool and clips at Scaff-Hold.com

HEIGHT WIDTH LENGTH WEIGHT
PRICE:$76.95+GST