fbpx

since 1997

EDGE PROTECTION FOR SALE

SAFER

FASTER

SMARTER

ROOFing
Applications

concrete
applications

Steel
Applications

Showing 13–24 of 29 results
Category
Filters Sort results
Reset Apply
No#
EDG13.1400.500
$52.02
Max:
Min: 1
Step: 1
Base Plate Bracket 150
No#
EDG13.1400.200
$27.50
Max:
Min: 1
Step: 1
No#
EDG13.1400.205
$39.39
Max:
Min: 1
Step: 1
No#
EDG13.0100.015.001
Max:
Min: 1
Step: 1
Fascia Bracket
No#
EDG13.1400.210
$205.00
Max:
Min: 1
Step: 1
No#
EDG13.1400.215
$18.10
Max:
Min: 1
Step: 1
No#
EDG13.1401.100
$15.09
Max:
Min: 1
Step: 1
No#
EDG13.1401.200
$30.18
Max:
Min: 1
Step: 1
No#
EDG13.1401.300
$45.27
Max:
Min: 1
Step: 1
No#
EDG13.1401.400
$60.36
Max:
Min: 1
Step: 1
No#
EDG13.1410.120
$72.98
Max:
Min: 1
Step: 1
No#
EDG13.1400.220
$145.39
Max:
Min: 1
Step: 1
Iron Roof Bracket V2
No#
EDG13.1400.225
$88.30
Max:
Min: 1
Step: 1
No#
EDG13.0100.009.001
Max:
Min: 1
Step: 1
Klip-lok-Bracket
No#
EDG13.1400.235
$30.88
Max:
Min: 1
Step: 1
No#
EDG13.1400.505
$51.89
Max:
Min: 1
Step: 1
No#
EDG13.1401.160
$70.16
Max:
Min: 1
Step: 1
Putlin Bracket
No#
EDG13.1400.240
$26.37
Max:
Min: 1
Step: 1
Rail Bracket
No#
EDG13.1400.230
$18.14
Max:
Min: 1
Step: 1
No#
EDG13.1400.405
$15.92
Max:
Min: 1
Step: 1
No#
EDG13.1400.510
$47.53
Max:
Min: 1
Step: 1
No#
EDG13.0020.013.001
Max:
Min: 1
Step: 1
No#
EDG13.1400.410
$18.52
Max:
Min: 1
Step: 1
No#
EDG13.1400.515
$19.83
Max:
Min: 1
Step: 1
Tile Bracket - Edge Protection
No#
EDG13.1400.250
$88.18
Max:
Min: 1
Step: 1
Under Rafter Bracket
No#
EDG13.1400.255
$72.12
Max:
Min: 1
Step: 1
No#
EDG13.0100.014.001
Max:
Min: 1
Step: 1
No#
EDG13.1400.415
$12.59
Max:
Min: 1
Step: 1

More than just a barrier

Quality protection. inspired design. unparalleled experience. exemplary service​

Durable & Strong

All our edge protection products have the ability to be adapted to suit the most complex of site access areas.

Comprehensive Solutions

Comprehensive edge protection solutions for all timber, concrete & steel application types.

Cost Effective & Fast

All edge protection fixing components have been robustly designed with cost, speed and simplicity in mind.

Exceeding Standards

Designed to meet and exceed AS/NZS 4994.1:2009 conformity standards for temporary edge protection systems.

We sell items such as L-Bends, handrail posts, couplers, brackets, guard rails and much more. All our height safety products are engineered and tested to ensure the highest quality standards are adhered to. We can supply all your Edge Protection needs for commercial or residential projects and we deliver Australia Wide. Designed to meet and exceed AS/NZS 4994.1:2009 the Australian / New Zealand conformity standard for temporary edge protection systems. All edge protection fixing components have been robustly designed with speed and simplicity in mind.

To speak directly with a qualified scaffolder for your scaffolding needs, call us today on 1300 919 905!

Australian Scaffold edge protection products are designed to suit all major brands of roofing including Longline, Custome Orb, Flatdeck, Spandek, Trimdek, Klip Lock and more.

Australian Scaffolds manufactures edge protection products in our Riverstone warehouse. Each product goes through a rigorous testing procedure to ensure our customers receive the best premium products available.

A CNC plasma cutter is a computer numerically controlled (CNC) machine that cuts through electrically conductive materials (such as steel, aluminium, brass and copper) by using a jet of hot plasma directed at the material to cut through it.

Australian Scaffolds plasma cutter is used to cut sheet metal into various shapes prior to bending, welding and galvanising processes are completed.

Manufacturing in-house gives Australian Scaffolds the technical knowledge to deliver better-designed products to our customers at a reduced cost.

General construction best practice and increasing regulations support the move away from ladders as a means of temporary access. As a result, adjustable stairs offer a simple, safe and practical solution for access between construction levels. Quickly and easily installed straight off the back of transport and ready for use in minutes.

The model WHS Regulations lists the scaffolding work that requires a high-risk work licence.

If you are carrying out scaffolding work where there is a risk of a person or object falling more than four metres, you must hold a scaffolding high-risk work licence. For example, if you erect a small frame to clean the eaves of a house or to paint a ceiling, and the distance you might fall is four metres or less, you don’t need a high-risk work licence. Above all, for more detailed information on setting up and operating scaffolds, see our General guide for scaffolds and scaffolding work.

What You Need to Know About Edge Protection

Roofing work involves several tasks that potentially expose persons to the risk of falls both through and from the edge of the roof structure. Physical edge protection must be provided for all roofing works, so far as is reasonably practicable. This section gives basic advice on the provision of fall protection for roofing construction work. This Code is not intended as complete guidance where the roofing work involves dismantling or demolition work.
The pitch of the roof is one of the key risk factors to be considered when determining the type of risk control measures to be put in place for roofing work. The critical angle is the roof pitch below which it is considered roof workers may reasonably be able to work and walk across the roof. Builders and subcontractors should determine the critical angle as part of their risk assessment. In no case should the critical angle be taken as greater than 26 degrees or 10 degrees where the presence or likelihood of surface moisture, oil or other conditions makes the roof slippery. Consideration should be given to the fact that the critical angle may be reduced in the presence of fully glazed and wet tiles.
Safe access must be provided for workers carrying out work on the roof. Depending on the edge protection system being used, you should ensure that: persons are able to access the roof through the roof edge protection without having to climb over the top rail or mid rail
  • access ladders are secured against movement
  • where a platform is located more than 500 mm below the roof edge, then additional means of access to the roof is provided
  • where an elevator, hoist or similar is used it is installed so that materials can be received at the roof level.
Guardrail systems should include top, mid and bottom rails or toe boards (see Figure 22). Where toe boards are used in place of bottom rails they must be able to withstand the likely impact loads. Guardrail systems should include the following:
  • toe boards or mesh in fill to prevent tools, materials or debris falling from the roof, unless a 2 metre ‘no go’ zone has been established to prevent persons entering the area below
  • a clear gap between rails not exceeding 450 mm. The clear distance between a mid-rail and a toe board or bottom rail should not exceed 275 mm
  • no gap between the roof edge, including the gutter, and a guardrail located outside the roof line exceeding 100 mm
  • a clear distance between the roof cladding and the bottom rail of not less than 150 mm and not greater than 275 mm
  • an effective guardrail height above the roof surface of not less than 900 mm (for roofs with a pitch over 10 degrees the effective height must be measured from a point 300 mm inside the roof edge)
  • in fill panels where the pitch of the roof exceeds 26 degrees.

FAQ

Yes. All our systems are designed to meet and exceed AS/NZS 4994.1:2009 conformity standards for temporary edge protection systems.

Yes. We ship Australia wide. If you want to confirm if we will be able to ship to you, please contact us to get a written quote.

Yes. We pride ourselves on our workmanship & labour and offer a lifetime guarantee on all our edge protection products & services.
Yes, we have developed our system over the years with the help of our customers to meet every requirement. Our on-site fabrication team are able to fabricate specialist components to suit custom applications with a quick turnaround if required.

Are your products guaranteed?

Are your products guaranteed?

Are your products guaranteed?

SHOPPING BAG 0